 |
| How to modify an Adband module for Helios to a Futaba 3PK |
|
|
|
| viernes, 29 abril 2005 | |
This page will not hold responsibility in any moment for any damages caused to the material used. The KOPROPO manufacturer has available two types of module for ADBAND, for the EX10 transmitter and for the EX1 transmitter. These two modules are sold through two references. TO carry out this adaptation we have used a module for the EX10 transmitter. 1- Dismantle the adband module. 2- Cut the plate of the glass side of the 5mm modules. Photo before cutting the plate.  Photo after cutting the plate.  3- Cut the pin track number 2 and number 3 of the connector (In the photgraph you can see that all have been cut but only with I+D ends.)  4- Connect the number 2 pin of the connector to the number 3 pin connector of the module plate.  5- Now you can enjoy a little Spanish omelette.  I hope that this article is of some practical help to you with the Mini-z and that if any of the readers of this article ends up applying this type of reparation, the you will remember me because I will be very grateful to recieve a nice ham at the end of the year. Iban Cardona Reus - Tarragona |
| < Prev | Next > |
|---|
.jpg)
