Spanish Deutsche Français
Contact TRP Who we are

My route:

Inicio » 1:28 Mini-z » MiniZ MR03 » MiniZ MR03 Optional Parts » Chasis MiniZ MR03 » PN Racing Mini-Z MR03 High Clamp Force T-Plate Mount colour Oran

Manufacturer:

Pn Racing

Ref: MR3009 Model:(MR3009)

PN Racing Mini-Z MR03 High Clamp Force T-Plate Mount colour Oran

9.56EUR9.56EUR9.56EUR9.56EUR9.56EUR
Availability notice

No StockNo stock

Current product

Stock updated :
238 hours amd 15 minutes ago

When it would come?

If i place order now, it will arrive: monday 2

Service FedEx I.Priority 48h/72h. International delivery for orders made before: 17:00

Payment Methods

Useful Information

Description:
PN Racing Mini-Z MR03 High Clamp Force T-Plate Mount colour Orange

Machined threads allow for higher clamping force on T-Plate to prevent shifting during high g-force cornering. Application of high torque to stock self tapping screws to prevent shifting of T-Plate often lead to stripped screw holes.

Double length aluminum T-Plate Mount with 4 interlocking tabs to insure precise alignment with chassis. Alignment of T-Plate mount is achieved thru interlock of holder to chassis alignment tabs instead of self tapping screw torque.

Countersunk crews are inserted one adjustment position after of T-Plate screw hole. Therefore, chassis with stripped holes for T-Plate can be salvaged with this T-Plate Mount that use a different hole location

How to install:
Note that since T-Plate Mount is double length, only the forward two T-Plate positions can be used on the chassis. (This is usually not an issue since the forward two position is enough to accommodate pretty much all bodies.)

Install the two countersunk screws to hold the T-Plate Mount onto the chassis. Do not over tight the self tapping screws, or the hole on the chassis may strip.

Fasten the T-Plate onto the holder with two machine screws. Be sure the machine screw threads protrude past the T-Plate Mount when the screws are seated. This will insure full thread engagement. Machine screws can then be torque tighter than the self tapping countersunk screws to securely fasten the T-Plate. Take care not to over torque machine screws.
It is advisable to test fit the T-Plate on the holder with the machine screws first to verify that that the machine screw threads protrudes past the holder. A minimum of 1 thread protrusion is recommended.

Quick Find

Use keywords to find the product you are looking for.

Advanced Search

Shopping Cart

0 items Free shipping 600 €

What's New?

Manufacturers

Notifications

Information

Tell A Friend

 
Tell someone you know about this product.
Technical Racing Products - Cif: J63090559
Carrer de Faraday, 112 - 08224 Terrassa (BCN) - Spain - Telf: 93 783 30 36 - e.mail: info@technicalrp.com